Conductivity Test Meter /Tariff:902680 Origin:Japan
The ultimate conductivity pocket tester. Your lab-
Measure conductivity of urine, saliva, water, soil or other fluids with dual point calibration accuracy.
The perfect tool to begin thinking through zeta potential and conductivity relationships as it relates to cardiovascular and renal stress and overall health. There’s the zone you want to be in and the zone you don’t and you can’t know where you’re at unless you measure.
Dr. T.C. McDaniel built a radically successful cardio/renal practice around the use of this single tool.
Comes with case, 1.41 & 12.9 millisiemen calibration fluids, instructions, quik card, and net access to the Biomedx conductivity manual, charts, and tracking sheets.
You can determine water conductivity with as little as 0.12 mL of sample.
Applications: The conductivity
of rain water is a trusted guide to determining atmospheric purity. In
agriculture, measuring the conductivity of soil allows farmers and
agronomists to determine optimum fertilizer usage and check the ‘health’
of soil after salt water damage. Interested in effects of government
Whether fresh water testing (rain, rivers, lakes, hot springs); aquaria; soil testing for improved agriculture and analysis of salt water damage; analysis of surface cleanliness prior to coating; and improved paint adhesion; checking urine and saliva and learning more about the connections of conductivity to zeta potential and health, this meter makes conductivity testing simple, anywhere.
Flat sensor technology realizes a reliable and direct measurement from just a drop of the sample.
Conductivity readings can be converted into Salt and TDS.
IP67 waterproof and dustproof.
Temperature compensation/Auto hold/Auto range change.
Measurement principle: 2 AC bipolar
Minimum sample volume: 0.12 mL or more
Measurement range Conductivity: 0 to 199.99 mS/cm
TDS: 0 to 9990 ppm
Display range: 0 to 199 mS/cm (The display value flashes when out of the range)
Range and Resolution:
1) 0 to 199 μS/cm : 1 μS/cm
2) 0.20 to 1.99 mS/cm : 0.01 mS/cm
3) 2.0 to 19.9 mS/cm : 0.1 mS/cm
4) 20 to 199 mS/cm : 1 mS/cm
Accuracy (Repeatability in measurement of a standard solution after calibration): ±2%F.S.±1digit (for each range)
±2% full scale (for each range)
±2% full scale (0 to 19.99 mS/cm)
±5% full scale (20 to 199.99 mS/cm)
Functions: Conductivity in siemen units & TDS in ppm • Auto range change • Temperature conversion (2%/°C fixed) • Auto hold • Automatic power off (15 minutes) • IP67 Water/Dust proof (no failure when immersed in water at a depth of 1 meter for 30 minutes, but the product can not be used underwater.)
Display: Custom (monochrome) digital LCD
Operating temperature/ humidity: 5 to 40°C, 85% or less in relative humidity (no condensation)
Power: CR2032 batteries (x2)
Battery life: Approximately 400 hours in continuous use
Main Material: ABS epoxy
Dimensions /Mass: 164 mm × 29 mm × 20 mm (excluding projections) / Approx. 45 g (meter only, without batteries)